12 V DC power output
Weatherproof and vandal-proof
Suitable to fit large CS-mount lenses
Polymer casing
Weatherproof and vandal-proof
AXIS T93F10 Outdoor Housing supports IP66 and NEMA 4X ratings against the ingress of dust and water, and IK10 rating for protection against impact and vandal acts. The installer-friendly, lightweight plastic casing protects from corrosion. All cables are protected inside the wall mount to enhance vandal protection and remove the risk of solar degradation. A slot is dedicated for an optional intrusion alarm switch. It comes with a wall mount and an integrated sunshield.
-40 °C/°F
AXIS T93F10 Outdoor Housing can power the camera and its heater and has a temperature range from -40 °C to 60 °C (-40 °F to 140 °F) for the housing itself. The temperature range in running operation depends on the camera model. For more information please check the datasheet.
The housing can power the camera at 12 V DC. AXIS T93F10 is suitable when AC/DC power is a requirement. The outdoor housing can be powered with 20-24 V AC or 12-28 V DC and no midspan is required.
Corridor format
AXIS Corridor Format Bracket B
As optional accessory, AXIS Corridor Format Bracket B can be purchased if the fixed box camera needs to be installed in a corridor format, but keeping the housing straight. The corridor format installation is particularly suitable for surveillance of narrow alleys or perimeters. For a list of cameras that can be installed using AXIS Corridor Format Bracket B, see the product page of the bracket.
Compatible products
AXIS M1134
AXIS M1135
AXIS M1137
AXIS P1375
AXIS P1377
AXIS P1378
AXIS Q1615 Mk II
AXIS Q1615 Mk III
AXIS Q1645
AXIS Q1647
AXIS T8645 PoE+ over Coax Compact Kit
AXIS T8648 PoE+ over Coax Blade Compact Kit
AXIS T99A10 Positioning Unit 24 V AC/DC
