安讯士半球恢复出工厂设置P3215-V

 1. Disconnect power from the product. 

2. Press and hold the control button and reconnect power. See Hardware Overview pictures

 3. Keep the control button pressed for 15–30 seconds until the status LED indicator flashes amber.

 4. Release the control button. The process is complete when the status LED indicator turns green. 

The product has been reset to the factory default settings. If no DHCP server is available on the network, 

the default IP address is 192.168.0.90 

5. Using the installation and management software tools, assign an IP address, set the password, 

and access the video stream. It is also possible to reset parameters to factory default via the web interface.

 Go to Setup > System Options > Maintenance and click Default